Signup For Email
Be the first to know about the latest deals and new releases!
Shop By UTV

Polaris Ranger RZR Clutch

April 23, 2009

DragonFire Racing RZR Clutch

DragonFire Polaris Ranger RZR Performance Clutch kit. Kit comes with Helix, replacement springs, weights and Aramid Fiber Belt. The tensile strength allows for higher load capability and new taper design dissipates cutch heat and provided larger contact patch for increased efficiency and less slippage. The clutch kit allows for increased horse power to the rear wheels, by improving clutch efficiency. Rear wheel gains were achieved by clutching it to 5800-6000 RPM.

IMPORTANT NOTICE Please order Stage 1 Clutch for Stock RZR no Mods. Please order Stage 2 Clutch for DragonFire Exhaust and Controller. RZR TECH PLEASE READ DFR Stage 1 Clutch Kit This is for a stock RZR. The DFR Clutch kit replaces the stock belt with a 100 HP belt, as well as the new weights and springs. We also include a spacer kit with the clutch. This spacer decreases the space between the belt and sheeve. The increased clutch weights allow for mid and low end acceleration. 5850 is final drive RPM, with 26 inch tires the RZR will do 62 MPH. DFR Stage 2 Clutch Kit This is necessary when adding the additional HP that comes with our RZR Controller, intake and DFR RZR Full Exhaust. You can not increase power with out proper clutching. We increase the low end Drive squeeze, the RZR gains tremendous low and mid acceleration. 5850 is final Drive RPM, with 26 inch tires the RZR will do 62 MPH Removing RZR Factory Spacer: DO NOT REMOVE: By removing the OE spacer you will create extra overdrive and but at the same time you will compromise your vehicles back shifting. The vehicle will be slower to come out of overdrive, and will constantly pulling too tall of a gear. The second major concern is the belt now rides two low in the secondary. The sheeves that belt rides in have a machined taper. At a certain point, the point where the stock spacer limits the sheeve, there is no more taper, the belt will become stuck below the taper causing damage to the clutch and belt, and potential the driver if it bound the motor. Many people have found that this happens while going down hill at high speed. DFR RZR Belt Rated to 100 HP Heat and HP compromise belts. The DFR RZR belt is designed for both and will allow for heavy load as well as horse power.

Search Blog:

About Us

After years of researching and developing the best products in the industry, DragonFire has taken UTV’s to the next level. Superior technology and innovation are incorporated into all of our products. The DragonFire team consists of industry experts in multiple disciplines, which leads to unsurpassed quality, performance and usability.